Plasterboard Disposal
Strip-Out Plasterboard Removal
Removal of plasterboard from demolished partitions, ceilings and dry-lined walls during refurbishments, with boards separated from studs, insulation and rubble.
What's involved
Strip-out plasterboard is messier than offcuts. It comes off walls and ceilings in broken pieces, often with screws, nails, tape, skim coat, paint and pieces of wallpaper still attached. Painted and skimmed board can usually still be recycled, but it must be separated from timber studs, metal track, insulation and masonry rubble. If our team is stripping the boards, we use pry bars and handsaws to remove sheets in the largest pieces possible, which creates less dust than smashing them. Dust sheets and masks are used throughout, and where the room is occupied we can set up a temporary dust barrier. If you are doing the strip-out yourself, pile the plasterboard separately from everything else as you go. Strip-out collections typically take 30–60 minutes to load. We will tell you if a load is too contaminated for recycling, because it then needs a different, more expensive route.
How we handle it
Describe the waste
Tell us whether it is clean offcuts, strip-out board, insulated board or plaster rubble, roughly how much there is, and where it is stored. Photos help us judge volume and contamination.
Get a fixed price
We quote one all-in price based on volume, weight, contamination and access. If anything has an old textured coating, we explain the testing needed before collection.
Keep it separate and dry
Stack or bag plasterboard away from timber, metal, insulation and general waste, and cover it if stored outside. Clean, dry board is cheaper to handle and easier to recycle.
Collection
Our team loads boards and bags by hand or by tail lift, sweeping up loose pieces. Most collections take under an hour, depending on volume and access.
Recycling and paperwork
Plasterboard goes to a facility that accepts gypsum for recycling or appropriate treatment. You receive a waste transfer note describing the waste correctly.
Price guide
Plasterboard disposal is priced by volume or weight, and by how clean the waste is. Clean, dry offcuts cost least because they recycle easily. Strip-out board with screws and skim is still recyclable but takes more handling. Insulated board and plaster rubble cost more, and anything with an old textured coating needs testing first.
- Full van load: £200–£320. Larger refurbishments or developments; boards must be kept separate from other waste.
- Half van load: £120–£180. Typical of a room strip-out or a small extension; price depends on weight and access.
- Bulk bag of plasterboard: £70–£110. One builders' bulk bag of mixed offcuts or strip-out board, collected from site.
Questions about strip-out plasterboard removal
How do I dispose of plasterboard?
Keep it separate from other waste and either take small amounts to a household recycling centre that accepts it, hire a dedicated plasterboard skip or bag, or book a registered waste carrier to collect it. Plasterboard should not go in a mixed skip or general bin, because gypsum must be kept apart from biodegradable waste.
Why can't plasterboard go in a normal skip?
Plasterboard is made of gypsum, which can react with biodegradable waste in landfill to produce hydrogen sulphide, a toxic gas that smells of rotten eggs. Because of this, gypsum waste must be landfilled separately or recycled. Many skip firms refuse plasterboard in mixed skips or charge a surcharge to separate it.
How much does plasterboard disposal cost?
A small load of clean offcuts typically costs from around £60 to collect, while a full van load usually costs £200–£320. Bulk bags generally cost £70–£110 each. Price depends on volume, weight, contamination and access. Clean, dry board is cheapest because it recycles easily.
Other services
Plasterboard Offcut Collection
Collection of clean plasterboard offcuts and damaged sheets from new builds, extensions, loft conversions and partition work, ready for gypsum recycling.
Insulated and Foil-Backed Board Disposal
Collection of thermal laminate, foil-backed, moisture-resistant and fire-rated plasterboards, which need sorting because not all recyclers accept them.
Plaster Rubble and Bagged Plaster Disposal
Removal of hacked-off plaster, skim, bonding coat and part-used or out-of-date bags of gypsum plaster, kept separate from brick and concrete rubble.
Artex and Textured Ceiling Assessment
Testing and safe handling of plasterboard with old textured coatings, which may contain asbestos and must be checked before any removal or breaking up.
Plasterboard Collections for Trades
Regular or one-off plasterboard collections for dryliners, plasterers, builders and developers, with bulk bags or dedicated plasterboard loads.
Strip-Out Plasterboard Removal near you
Get a free plasterboard disposal quote
Tell us what you need and we'll come back with a clear price.
Request a quote