Plasterboard Disposal

Plasterboard Disposal

Artex and Textured Ceiling Assessment

Testing and safe handling of plasterboard with old textured coatings, which may contain asbestos and must be checked before any removal or breaking up.

Free Plasterboard Disposal quote

No obligation. We only use your details to reply about this job.

A building site with new plaster

What's involved

Textured decorative coatings, often called Artex after one well-known brand, were applied to plasterboard ceilings and walls for decades. Some of those applied before 2000 contain a small percentage of asbestos. Breaking up or sanding such boards can release fibres, so we do not collect or remove boards with old textured coatings until they have been tested. A sample is taken by a qualified surveyor and analysed by an accredited laboratory, with results usually back within a few days. If no asbestos is found, the boards can be removed and handled as normal plasterboard waste, although the coating may affect recycling. If asbestos is present, the work must be carried out by people trained under the Control of Asbestos Regulations 2012, and the waste disposed of as hazardous waste with consignment paperwork. This adds cost and time, but it protects you, your family and the people doing the work.

How we handle it

  1. Describe the waste

    Tell us whether it is clean offcuts, strip-out board, insulated board or plaster rubble, roughly how much there is, and where it is stored. Photos help us judge volume and contamination.

  2. Get a fixed price

    We quote one all-in price based on volume, weight, contamination and access. If anything has an old textured coating, we explain the testing needed before collection.

  3. Keep it separate and dry

    Stack or bag plasterboard away from timber, metal, insulation and general waste, and cover it if stored outside. Clean, dry board is cheaper to handle and easier to recycle.

  4. Collection

    Our team loads boards and bags by hand or by tail lift, sweeping up loose pieces. Most collections take under an hour, depending on volume and access.

  5. Recycling and paperwork

    Plasterboard goes to a facility that accepts gypsum for recycling or appropriate treatment. You receive a waste transfer note describing the waste correctly.

Price guide

Plasterboard disposal is priced by volume or weight, and by how clean the waste is. Clean, dry offcuts cost least because they recycle easily. Strip-out board with screws and skim is still recyclable but takes more handling. Insulated board and plaster rubble cost more, and anything with an old textured coating needs testing first.

  • Small load of offcuts: from £60. A few sheets or several bags of clean board from a small job, collected for recycling.
  • Textured coating asbestos test: from £80. Sample taken and analysed before boards with old coatings are disturbed or removed.
  • Insulated or foil-backed board: from £90 per load. Bulky and harder to recycle, so priced separately from standard plasterboard.

Questions about artex and textured ceiling assessment

What about plasterboard with Artex on it?

Some textured coatings applied before 2000 contain asbestos, so plasterboard with an old textured finish should be tested before it is removed or broken up. A surveyor takes a small sample for laboratory analysis. If asbestos is found, the boards must be removed by trained specialists and disposed of as hazardous waste.

Get a free plasterboard disposal quote

Tell us what you need and we'll come back with a clear price.

Request a quote