Plasterboard Disposal

Guide · Homeowners and landlords · 3 min read · Updated 16 November 2026

Artex Ceilings and Asbestos: Removing Coated Plasterboard Safely

Short answer

Textured ceiling and wall coatings applied before 2000, often called Artex, may contain asbestos. Before you sand, scrape, drill or remove plasterboard with an old textured coating, have a sample tested. If asbestos is present, the Control of Asbestos Regulations 2012 require the work to be done by suitably trained people with proper controls, and the waste is hazardous, so it must not go in a skip or general collection.

A hallway with white walls

Why textured coatings can contain asbestos

Textured decorative coatings were popular in British homes for decades, applied to ceilings and sometimes walls in swirls, stipples and patterns. Many people call any textured finish Artex, after one well-known brand. Some products made before asbestos was banned in the UK in 1999 contained small amounts of white asbestos, chrysotile, to strengthen the coating. You cannot tell by looking whether a particular ceiling contains it. Intact, undisturbed coatings in good condition pose a low risk. The danger comes when the coating is sanded, scraped, drilled or broken, which can release fibres into the air. Asbestos-related diseases develop many years after exposure, which is why the safe approach is to avoid creating dust in the first place. A test before work begins removes the guesswork for everyone in the house and for the trades working there.

When to test

If your home or rental property was built or decorated before 2000 and has textured ceilings or walls, test before any work that disturbs them. That includes removing the plasterboard, over-boarding with fixings, fitting downlights, chasing in cables or skimming over after sanding. Testing is inexpensive compared with the cost and risk of getting it wrong. A sample is taken carefully from the coating, sealed and sent to a laboratory for analysis. The area is sealed after sampling. Results usually come back within a few working days and confirm whether asbestos was detected. If you are buying an older home, it is worth noting any textured ceilings during viewings and planning a test before renovation. Building surveys often flag textured coatings as possibly containing asbestos, which is a prompt to test rather than a confirmation.

  • Do not sand, scrape or dry-brush the coating before testing
  • Do not drill multiple holes to take your own samples
  • Keep the room ventilated but avoid disturbing the surface
  • Test before you book plasterboard collection, not after

What the law requires

The Control of Asbestos Regulations 2012 set out how work with asbestos must be managed in Great Britain. They require that work on asbestos-containing materials is assessed, carried out by people with suitable training, and controlled to keep exposure as low as possible. The Health and Safety Executive publishes guidance on work with textured coatings, and the level of control needed depends on the type of material and the work involved. Asbestos waste is hazardous waste. In England and Wales it must be moved with a hazardous waste consignment note, and in Scotland the special waste rules apply. It must be double-bagged or wrapped, labelled and taken by a registered carrier to a site permitted to accept it.

Test resultWhat happens next
No asbestos detectedBoard can be removed and recycled as normal plasterboard
Asbestos detectedRemoval planned by trained operatives with controls in place
Asbestos wasteWrapped, labelled and moved as hazardous waste with paperwork
Coating left in placeKeep in good condition and do not disturb

How coated plasterboard is removed safely

Where asbestos is found, removal is planned to keep fibres from spreading. The room is cleared and sealed off with sheeting. The coating is kept damp to reduce dust, and wherever possible boards are unscrewed and taken down in whole sheets rather than broken. Operatives wear suitable respiratory protection and disposable overalls, and use a vacuum cleaner designed for asbestos dust rather than a domestic one. Waste is wrapped in heavy-duty polythene or bagged, labelled and kept secure until it is collected. The area is cleaned and checked before it is reopened. This is very different from ordinary plasterboard strip-out, which is why the test comes first.

Options other than removal

Removing a textured ceiling is not always necessary. If the coating is in good condition and you simply dislike the look, over-boarding with new plasterboard, or skimming over the coating, may be possible, though any work that disturbs the surface still needs the right precautions if asbestos is present. Encapsulating with a suitable sealing paint is another option for intact coatings. Each approach has trade-offs, and whatever you choose should be recorded so that future occupants and trades know the material is there. If you do leave a coating in place, check it from time to time. Cracking, flaking or water damage may mean it needs attention, and the advice to test before disturbance still applies to any repair.

Landlords and asbestos

Landlords need to think about asbestos when planning works between tenancies. Any contractor asked to strip ceilings, fit lighting or alter walls in an older property should be told about textured coatings and shown test results if they exist. In common parts of flats and other non-domestic premises, the duty to manage asbestos under the regulations applies to whoever is responsible for maintenance. Keeping a simple record of where textured coatings are, whether they have been tested and their condition is good practice and saves time on every future job. Tenants should be told not to drill, sand or scrape textured ceilings without permission, and to report damage promptly.

Questions people also ask

Does all Artex contain asbestos?

No. Many textured coatings never contained asbestos, and products made after the UK ban in 1999 do not. However, some older coatings did, and there is no reliable way to tell by looking. If the coating was applied before 2000, have a sample tested before disturbing it.

Can I remove an Artex ceiling myself?

Do not start until the coating has been tested. If no asbestos is found, removal is ordinary building work. If asbestos is present, the Control of Asbestos Regulations 2012 and HSE guidance require suitable training, controls and protective equipment, and the waste must be handled as hazardous. Most homeowners use trained professionals.

How much does an Artex asbestos test cost?

A textured coating asbestos test costs from £80. That covers taking a sample safely, sealing the sampled area and laboratory analysis. Results usually come back within a few working days and tell you whether the plasterboard can be recycled normally or needs handling as hazardous waste.

Written and checked by the Plasterboard Disposal team. Read our editorial policy.

Get a free plasterboard disposal quote

Tell us what you need and we'll come back with a clear price.

Request a quote